502 pistons
 

Anyone got a decent set of std 502 pistons for a reasonable price? Just got outbid on a set because the plane took off right at the eBay auction was ending!

The JE700 ones....

Don't need rods or pins, just the piston.

PM or email at Eric.ancarrow ( at ) ferguson.com

I have a full set std bore JE 700, but I don't want to sell without the dimple rods as a set, I understand pistons only, just letting you know.

what did they sell for?i might have a set.

http://i1243.photobucket.com/albums/...t/100_0944.jpg

http://i1243.photobucket.com/albums/...t/100_0943.jpg

190, but They were perfect..... Not sure they had ever been run though

Deep - do you want to sell without rods? Or do you want to sell WITH the rods at a WITHOUT the rods price?

I thought maybe you would change your mind . I must sell all to help offset the cost of getting blown . Sorry I couldn't help you .

Have the same set as well (with rods and pins).... Pm if interested

I have two sets of brand new in the box JE 124076
text or call for info, I have rings as well. 573-434-6454

Have set a pistons from 525EFI, for $375.00 100 hours

I gotta set i think. I'll have to pull the box out of storage, i'll let em go cheap, or to the trash, whichever is easier.


I have 7 JE 747 F.

Skirts are a little worn and the wrist pin journals were scratched when the pins were removed.


[ATTACH=CONFIG]534097[/ATTACH]

To the trash they go !!!

I have a set of std 502 pistons in good shape, no rods - $125.00 plus shipping.

Have lots of 502 pistons! $10 each! I would even throw in a couple of spares.
504-616-6005

I have a set of standard 502 pistons with the original rings on them ! These could be washed oiled and installed.
i got them after they were run on the dyno once to set a baseline in engine development for Mercury. The engine was warmed then given a stepped dyno pull.PM me or call 614 205 5401

I found some. Thanks guys