Extension boxes and xr or sc drives wanted
 

Looking for nice stuff no salty parts bravo xr or imco sc drives with-2 lowers. And extension boxes closer to the Midwest the better call 314-608-1979. I will want to check gears and bearings do don't freak out if I ask.

Looking for nice stuff no salty parts bravo xr or imco sc drives with-2 lowers. And extension boxes closer to the Midwest the better call 314-608-1979. I will want to check gears and bearings do don't freak out if I ask.

Hard to belive there's nothing out there. Pm me with what you have and I'm looking for preowned not new.

Pm Brian41 he has a set sitting in his shop. I think they are one of his customers. Imco boxes, xr uppers and imco lowers.

Is that correct tried it said invalied user

Was it that complete set in the classifieds I had a deal worked out all the way up to the point of leaving a deposit and guy never called or text me back he text me a PayPal address I verified the amount with him and he never responded again to text or 3 phone calls. It was a Michigan phone number this was about 1 week ago glad now I didnt send that deposit since I tried calling and texting 5 hrs after he sent me his address only to get no reply.

I will PM his number to you

Bronxphantom106 Has a set for sale complete

I tried him he sold one side already thanks

Everything on the popular sites latley I've seen hope to turn something new up

I have twin xr uppers checked and sealed by dealer whit drive showers and one stellings extension box will make a package deal .

-2 lowers are for sale on regular basis to make the xr s complete and might have a lead on the second stellings box

What's your budget

Box is full, cant PM

I dont mind paying Fair market value. But I'm not going to pay close to new cost. For someone's used parts. my box is empty. Now Also I'm leaning to the stellings box now I can't move my motors up anymore.

I've been considering upgrading to SCX's. I'm currently running stellings boxes with SC uppers and -2 SC lowers with 1 1/2" spacers. Lowers are 1:50 gears now and will include 2 sets of 1:36 lower gears NIB. Throw your fair market value price at me and I'll see if it's worth my while to make the change. They might have 20 hours on them since last being apart for a check.

Still looking please send me some picture and. A price range. I've got a nice set of drives in my sights but would really like to purchase a complete set up. I've had quite a few responses on what sounds like nice parts. But no pictires or prices yet.

XR upper complete drive 5500.00
Just upper 4000.00
Just hag drive gone threw ready to go. 0hrs
i went threw it as a precautionary built a blower motor, made to much power so goin w a scx.

Crazy busy with Christmas. I will get you pics ASAP. Working, working

I figured everyone is busy with the holiday. Just want to make sure I have plenty of time to make the changes before summer.

Yea, me too

have a 06 sweptback -2 sportmaster $5200, and a squaretop XR -2 Imco square has less than 60 hrs. and was first splashed 2012 $6700 both are big shaft [email protected]

fin, just so you know, I have a pair of double wing-plates that bolt onto the Bravo drive...these wing-plates were custom built to compensate for the added length needed for the extension boxes. In other words, you won't have to buy the transom extension brackets that bolt onto the transom to extend the external steering rams as these custom made stainless steel wing-plates I have are already integrated in the wing-plates. Besides, in my opinion, they look pretty cool too vs the transom bracket extensions.

I had these on my 32'/AT for several years with Stellings extension boxes, and they are big plates---I always sat on them while I was relaxing or swimming off my boat....PM me if you are interested.

I have drives but still looking for extension boxes and gimbles. Probably get those mounted before I try to figure steering out thanks Kamma

Still looking for stellings adjustable boxes.

I have one that I already mentioned to you if I m correct , the other of the pair is sold by previous owner .
New paint,seals ,bearings and stickers

$ 2500 shipped to the usa

extended Water neck is also there only forgot on the pic :)


http://i1007.photobucket.com/albums/...ps7f334570.jpg

I would like to find a pair of boxes in nice shape will also need steering ram mounts that are attached to extension box. I have already purchased drives for the project. so they are no longer needed. I will emphasize that I am looking for good used parts and the stellings brand only at a fair price. if you have the above mentioned parts don't hesitate to call me at 314-608-1979 I will be ''KICKING TIRES'' till I find the right deal.

Thanks Guys! If someone else has a single complete set up like bor has posted let me know.

KAAMA How much do you want for the extended wing plates??

Please delete or inform me how to delete thanks.

Is there an inner with this box.

Are you talking about my box , if so what do you mean whit " inner"?

If you need inner plates. I have 2 new bravo plates available that will work with any box with bravo bolt pattern. I'll take $100. each plus the ride.

I have some merc Inners I guess I was looking at the imco inners people use with the stellings that give the bilge a cleaner look

What happened to all the boxes. Two years ago these were all over.

Good luck finding Stellings stuff. I believe they are out of business and no longer being made. Yes, the Stellings inner plates do look better in my bilge. Te stock ones could be machined and cleaned up I suppose.