External steering hardware Lantham or?
 

Any one have any pins spacers or bushings laying around for Lantham cylinders or any other cylinders for a external steering .I'm missing stuff.JOHN SR

I have I think at least two latham machined stainless steel hydraulic ram mounting pins. They mount the ram to the wing plate on the drive. Is that what you are looking for? Shoot me your email address.

I just gave 2 teflon inserts and some stainless spacers to john d with some clevis pins he bought . Latham components are silly high dollar but all the little nuts bolts bushings spacers are avail from them new .some are silly high dollar but many are suprisingly reasonable .

I do have some stepped pin bolts and such kicking around too if your looking for some odd bits and pieces

Got some parts lined up from airjunky,and rslick. Any one else out there with pieces bushings bolts ect.I'm doing a project.

Ill have those pics tomarrow if verizon doesnt put the strangle hold on my superphone unlimited internet combo that usually puts the email only kind of peps outside my box .

It will of been good while it lasted ( not very long )

ttt

ttt

ttt