| CDShack |
02-17-2015 01:08 PM |
I have a matched pair of full length big tube headers for side-by-side install on 33-1/2" centers. Reported to be the last set Bassett built and were hand-made. (has "Bassett" nameplate welded in). 5/8" exhaust flanges. Heavy duty double-wall stainless, full water jacket into "flow-through" flanges into 4" collectors. Partially water-jacketed tails. (They are water-jacketed to end of original tails and were originally set up for Merc/SSM, but I added stainless tubing to lengthen them to clear the transom on surface drive boat--it can be cut back to any length you want) all stainless fittings. No rubber hoses or bypass hoses. Never repaired, never needed to be. Could use polish on top tubes to be perfect, a little dull from laying on them working on motors over the years. Always fresh water, never have seen salt. Going Turbos and don't have a need anymore. You will be original. $2500 a set + shipping.
|
