WTB: Blower belt - B&M 250 - non-intercooled
 

I've looked all over my shop for my blower belt. No luck. Either it's just gone or never made it.

I think the standard length is 53.75 inches but I can measure. Anyone got one to part with? Thanks!

16 rib? I've got a few of them.. I'm looking for a lower pulley and a tensioner set up..If you have anything or know of anyone that does I'd like to get together. Either way I'm sure I can get you a belt.

I measured it and it's 53.75"

I can't help you with the tensioner and pulley. I was lucky that I was able to find everything pretty much complete from the lower pulley all the way to the flame arrestor. Driving me crazy not being able to find that belt!

If you have one that'll work, let me know how I can take it off your hands. Thanks!

-Tom

Well out of 7 belts I only have 2 at 53.75..the rest are 59.25..sorry, I really thought most were the shorter ones..

I have a company that special ordered from bando, they have 6 left (min order was 8) I bought a set for like 50.00 each www.kpaulindustrial.com the part no is 16pk1365....they are super easy to deal with and veteran owned, if thats good for you

Thanks! I stumbled upon their site while looking for a suitable belt. I was able to order it, and I should have it by Saturday. Happily spent my money with veterans too!

Based on what I just paid for the belt.... the markup is extreme. Folks are making well over 120% margin on these things. Weiand must thread theirs with gold because they want $225 for it! I'm all for people making money, but not like that!

Let me add that I was planning on buying new from Teague, but their listed belts were for only for Superchiller setups.

they had to order a sleeve so that I could have 2 they really took care of me because no one else would order a sleeve to sell me 2