Lots of little parts
 

I am in the process of wrapping up my 242 to sell. I need a bunch of odds and ends, here is a list of what i need. I would like to buy all of this from one person if possible. This is all for an 89 Merc 454 330 hp.

Carb linkage- all of the parts to hook up the cable to that carb for rochester carb
5- Sterndrive to gimble nuts for Bravo
2- Trim ram pin nuts
2- Outer trim ram rubber bushings
inner and outer washers for trim rams at sterndrive
2- forward large motor mount nuts-
water hose from inner transom assembly to sea pump
7.4 liter plastic carb cover. Can be for either 330 hp or Mag

If you don't have everything on the list but most, let me know what you have and cost.

Thanks
Mike

I have most of this but to find it.... Do you not have a fastenall near you?

I do have a fastenal near me.

I would be interested in the parts that you have, I'll be honest though I'm in kind of a hurry to get everything as I would like to get my boat on the market to be sold. I did just buy everything I need to connect the trim ram to the drive, but other than that I still need everything. Let me know what you have, how much, and how long to get it around.

Thanks,
Mike

Also- your inbox is full...

I have the carb cover.

Carb cover taken care of! Thanks Tigweldersm