Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Wanted (https://www.offshoreonly.com/forums/wanted-244/)
-   -   Any 2.3 Whipples out there (https://www.offshoreonly.com/forums/wanted/327770-any-2-3-whipples-out-there.html)

682gold 06-25-2015 01:20 PM

Any 2.3 Whipples out there
 
Seeing if there are any 2.3 Whipple chargers out there. I have a pair of 500efi's Im considering putting some on.

EWB 06-25-2015 02:39 PM

Would you consider a new set of 4 liters I would make you a deal on the ones that I have.

Smitty 06-25-2015 02:53 PM

682-- you need to be looking for 3.3 Whipples. 2.3 is borderline for that motor. And the 3.3 ones sit nice and low in the middle versus the 2.3 hanging off the side. Go with the 3.3 and you can run more boost if needed later and not heat it up as much.

682gold 06-25-2015 03:35 PM


Originally Posted by Smitty (Post 4322664)
682-- you need to be looking for 3.3 Whipples. 2.3 is borderline for that motor. And the 3.3 ones sit nice and low in the middle versus the 2.3 hanging off the side. Go with the 3.3 and you can run more boost if needed later and not heat it up as much.

10-4 That is good advice. These motors have been upgrades. Aluminum heads, larger throttle body, cam upgrade and Mark Boos did the computers. Making 585hp and 600ft tq

mike tkach 06-27-2015 07:54 AM


Originally Posted by Smitty (Post 4322664)
682-- you need to be looking for 3.3 Whipples. 2.3 is borderline for that motor. And the 3.3 ones sit nice and low in the middle versus the 2.3 hanging off the side. Go with the 3.3 and you can run more boost if needed later and not heat it up as much.

smitty,whipple also made a 2.3 for a carb that mounts like a normal unit on a innercooled manifold.

airjunky 06-27-2015 10:14 AM

Yea i was thinking he was going to sell the blue efi systems and go to intercooled carb 2.3's
If he could find a pair.
remember there are a few 2.1s out there also looks almost identical to the 2.3 carb but almost impossible to find internal parts for

INDY27 06-28-2015 08:16 PM


Originally Posted by Smitty (Post 4322664)
682-- you need to be looking for 3.3 Whipples. 2.3 is borderline for that motor. And the 3.3 ones sit nice and low in the middle versus the 2.3 hanging off the side. Go with the 3.3 and you can run more boost if needed later and not heat it up as much.

Whipple made at least 3 different 2.3 kits for the 500 efi, the one that hangs off the side used stock plenum and the other versions did not...I have two boats with 500 efi's running 2.3's and they have been flawless.

runninragged 06-29-2015 07:19 AM

EWB im interested in those 4.o whipples give me a call @ 631-981-0797 thanks jeff


All times are GMT -5. The time now is 03:35 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.