Dry tails for triple 42 fountain wanted
#1
Registered
Thread Starter
Join Date: Jul 2012
Location: Central Square & Fishers Landing, 1000 Islands NY
Posts: 456
Likes: 0
Received 1 Like
on
1 Post
Dry tails for triple 42 fountain wanted
Looking for a set of dry tails for mainly my two outside motors. We can modify my existing but if I can find some it will save me some time. I am pretty much sure that we will have to make/modify the center motor tails. I want dry to the tips because of my new cams. Anything out there? I have searched OSO, Ebay, etc.
#2
Registered
My brother had the same boat and same problem. He had to get custom from cmi. I wanted him to do the center out the side right behind the saddle tanks. He ended up going through the stock holes though. Would have been bad azz and cheaper. Good luck!
#3
Registered
Thread Starter
Join Date: Jul 2012
Location: Central Square & Fishers Landing, 1000 Islands NY
Posts: 456
Likes: 0
Received 1 Like
on
1 Post
Yeah, I thought about that but don't want to come out the side. I actually am contemplating removing the saddle tanks while the motors are out of it. My engine builder/buddy can build us whatever we need. He builds headers and turbo exhaust systems every day, its just a little harder doing the center motor with all of the bends. Here are a few pics of what he just built for his own 69 Chevelle Promod under construction..[ATTACH=CONFIG]543137[/ATTACH][ATTACH=CONFIG]543138[/ATTACH][ATTACH=CONFIG]543139[/ATTACH][ATTACH=CONFIG]543137[/ATTACH]
#6
Registered
Islander, whose your motor builder buddy? I'm in Cuse and looking for someone reputable and local. Also a 1000 islands boater every weekend for the last 20 years