Need Several Big BLock Parts 502 ASAP PLease
 

Hi there Guys Im in need of 502 parts

1. Need a good 502 block
2. Need a good 502 crankshaft. would love to have something good to hold up to the Procharger.
3. And also need a new or good used camshaft with lifters.

Any help would be greatly appreciated. Thanks in advance for any and all help and advice.

Gen IV, V, or VI.

Which camshaft ? And if FT or HR.

The boats is a 1996 model. Carb. engine Donzi has eleletric fuel pump so I dont need the mechanical fuel pump boss on the block. As far as the camshaft something a little over stock but will work with the factory rocker arms and would still be good later down the road for a procharger. If that makes any since at all. Also Im not sure what you mean by FT or HR sorry but please let me know and I will find out. Thank you SB for the help so far. Just to help with you knowing what Im doing the boat came with a 454 which is now trashed. I have a set of Factor 502 heads, Rods, and a set of SRP pistons to use. And wanting to upgrade to a 502, using these parts I already have. Plus the few others thhings im looking for now. Again thanks for the help Sir.

HP500 cam and lifters help any?

I have a gen 6 Crank, probably needs a polish text me @ 612-701-4440

SB I Sent PM. Gen VI with Hydrolic rollor lifter. As far as the engine goes.

500 hp long blocks?

I have two gen V cranks. Text me if interestd 740 817 2245