#4 speed master studs,
 

removing 2" spacer and need standard studs for two drives,

Thanks

Moxy

Make spacers up to go under head of nut. I dig the injection that's what I run.

pretty sure it doesn't work that way, studs appear to be way to long

Thanks

Moxy

you cant do that with number 4s it only works on number 6s I have a box full of studs if you give me the length I will check for you.

Thanks, I have no idea of the stud length, I haven't removed the lowers yet? wont be until I have the studs, ill see if I can source a parts list for the #lV's and ill let you know

Thanks

take 1 out -2 inches from it. go to a machine shop have them cut you X amount.

Only prob is if he wants to put spacers back in, hes back to square 1 again

ya don't want to limit my options just yet, drives are 2" below bottom, PO had 3 blades and a hell of a time planning boat, 4 blades work excellent and want to see if I can run drives higher


Thanks

Moxy

[QUOTE=MILD THUNDER;4445927][url]http://www.marinepowerservice.com/BoatingStore/lookup_parts_mercyear2.cfm/coll_style/04/pickModel/SSM3/pickDrive/0/index_nbr/932/block_nbr/18/modNum/71501016/Doc_Part_nbr/PMC

Thanks for the info, I don't know if im out of touch but $20.00 for a stainless stud seem outrageous, does anyone know the specs,

Moxy