WTB SAE3 Adaptors and couplers for SeaTek's
 

Adapters/housings and couplers. Anyone have a couple of these sitting around? For ZF 301 or ZF 280 or BW 73c's. Or even Twin Disc!
Thanks!
David

Bump

Bump

Bump. Help please!

BWs will never handle the torque of the Seatek, 280s will be on the limit, 301s or 305s you will be fine,
Have you enough engine bay length? my motors are 65" long with 305s

Thanks for your input. I have changed my course on trannies. I have decided on 301 coaxial. The 305's are a lot heavier. I have plenty of length in the engine bay. I am now in search of 301's with 1.1 to 1 ratio(I don't see any 1 to 1 or overdriven with this model). So these trannies, Sae3 housings, and adapters. Any ideas where these can be had?
Thanks

305 is 216 lbs 301 is 191 lbs so there is very little in it 301c only comes in 1.1-1 if you want overdrive you need to go with the 301 with drop output and custom gears as ZF don't do overdrive in this unit anymore.

Tell you what I do have a twin disc 5075 SC coaxial SAE 3 with overdrive 0.86-1 all you would need to do is find another probably easier than a ZF unit to source.

Forgot I had this, I was going to use it on my Seateks but decided to ditch the #6 drives as I need a drop output.

Is this a second one, or just different angle? Also, do you have couplers? I looked the trains up, it appears it comes in .80 and .92 and greater, maybe they made a .86 at one time.

Same box just different photo, no couplers but these are easily sourced, just checked the plate you are correct is 0.80-1 even better.