94-96 454-502 keihin injector fuel rail
#1
Registered
Thread Starter
Join Date: Jul 2008
Location: NORTH TEXAS
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
94-96 454-502 keihin injector fuel rail
Wanting to purchase just the rail for a early mag efi intake the one that used Keihin injectors, wanting one to send to Eddie Young to make if feed from both ends of the rail. Not wanting to spend a lot on it. 805405T part number
#5
Banned
iTrader: (9)
I have a like brand new one - with the regulator on the front. There is an issue with these rails that IMO needs to be address across the board whether they are brand or used..
I also have spare injectors all OEM - They all are flow tested, electrical tested, cleaned and balanced by myself or if one needs to have theirs checked as well.
I also have spare injectors all OEM - They all are flow tested, electrical tested, cleaned and balanced by myself or if one needs to have theirs checked as well.
Last edited by BUP; 09-15-2017 at 02:19 PM.
#6
Registered
Thread Starter
Join Date: Jul 2008
Location: NORTH TEXAS
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
I am wanting to fix all the issues with the rail. I have a good rail that Eddie Young did the fix on the injector hole that is to small and I have adjustable regulator on it. But I am wanting him to do the full bore feed fuel from both ends and he does alof of other things to it. You then don't use the rail regulator anymore at all. You use a separate big aeromotive regulator. I want to do this to a new or used rail that I can buy cheap.