Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Wanted (https://www.offshoreonly.com/forums/wanted-244/)
-   -   Arneson Parts (https://www.offshoreonly.com/forums/wanted/352825-arneson-parts.html)

payuppsucker 03-14-2018 08:33 AM
Arneson Parts
 
I'm looking for a chain for an ASD 7. If you have one but don't want to part with it I'd pay to rent it so I can get one made. 901-491-4500

kaje 03-15-2018 03:32 AM
Just call Rik. He has these in stock and if its the older ASD6 you can upgrade to the beefier gears and chain but you did say ASD7. Pricing from Rik on these isnt bad at all

payuppsucker 03-15-2018 07:59 AM
Originally Posted by kaje (Post 4616044)
Just call Rik. He has these in stock and if its the older ASD6 you can upgrade to the beefier gears and chain but you did say ASD7. Pricing from Rik on these isnt bad at all
I've been trying to get parts from Rik since October. He has nothing in stock.

green lightning 03-15-2018 08:26 AM
Can you use your old chain and have a copy made from that one?

payuppsucker 03-15-2018 08:28 AM
Originally Posted by green lightning (Post 4616077)
Can you use your old chain and have a copy made from that one?
Possibly, if I knew the correct length. Unfortunately mine is in pieces so I'm unable to determine the length.

green lightning 03-15-2018 09:56 AM
Sorry to hear about your chain issue , but I only have one and it's in the boat and kind of a pain to take the chain box apart , I do have some studs and seals

payuppsucker 03-15-2018 10:02 AM
Yea, I wouldn't want you to do that. Hopefully I have one located, waiting on the guy to get back from Costa Rica. Thanks.

bor 03-16-2018 03:58 PM
Asd 7 chain
 
i have a pair asd 7 m drives and have one apart but what ratio do You have as i think they could be different in length .

as im located in europe i could measure it for You


payuppsucker 03-16-2018 05:29 PM
Originally Posted by bor (Post 4616356)
i have a pair asd 7 m drives and have one apart but what ratio do You have as i think they could be different in length .

as im located in europe i could measure it for You

I have 1.3:1 ratio, large sprocket has 34 teeth and the small sprocket has 24. My sprockets are 1.625 inches in width. Thanks for any help you can provide.

bor 03-17-2018 04:40 AM
I have 26 teeth small and 34 teeth big Sprocket there 1 7/8 “ inch wide

the chain has 27 links when stretch out its 12 .5 “ long outside to outside and 11.5 “ inside to inside

the outher diameter is 28 1/8 “

hope this helps

bor

Unlimited jd 03-17-2018 06:20 AM
Originally Posted by payuppsucker (Post 4616075)
I've been trying to get parts from Rik since October. He has nothing in stock.
well that’s a major draw back to arnesons that never gets brought up. I’m a fan, and really dislike bravo and bravo based drives, but when I Unexpectedly had to repair one last week I had all the parts by the end of the day and rebuilt the upper by the next morning.

payuppsucker 03-19-2018 11:22 AM
Originally Posted by bor (Post 4616411)
I have 26 teeth small and 34 teeth big Sprocket there 1 7/8 “ inch wide

the chain has 27 links when stretch out its 12 .5 “ long outside to outside and 11.5 “ inside to inside

the outher diameter is 28 1/8 “

hope this helps

bor
Sounds like you have larger sprockets and less drop than what I have but thanks for measuring.

payuppsucker 03-19-2018 11:24 AM
Originally Posted by Unlimited jd (Post 4616419)

well that’s a major draw back to arnesons that never gets brought up. I’m a fan, and really dislike bravo and bravo based drives, but when I Unexpectedly had to repair one last week I had all the parts by the end of the day and rebuilt the upper by the next morning.
Agreed Jamie.

Inrecovery 03-20-2018 10:47 PM
chain
 
Originally Posted by payuppsucker (Post 4615875)
I'm looking for a chain for an ASD 7. If you have one but don't want to part with it I'd pay to rent it so I can get one made. 901-491-4500
spare parts. I had a chain replaced in 2016 because the sides had wear spots. 1.36 ratio I will look thru the boxes in AM. I also have a spare drive in a shipping crate , I'll check out the ratio on that one. You are welcome to it, the old style was a Morse chain like you see in a transfer case. I did upgrade to the newer gears and chain in Nov 2016 , but it was a wait due to getting the company to tool up.

payuppsucker 03-29-2018 07:18 AM
Rik came through with a chain/sprocket setup. Thanks to all for the responses.

Canadiansonic31ss 06-04-2025 07:54 PM
Originally Posted by Inrecovery (Post 4617164)
spare parts. I had a chain replaced in 2016 because the sides had wear spots. 1.36 ratio I will look thru the boxes in AM. I also have a spare drive in a shipping crate , I'll check out the ratio on that one. You are welcome to it, the old style was a Morse chain like you see in a transfer case. I did upgrade to the newer gears and chain in Nov 2016 , but it was a wait due to getting the company to tool up.

Who did u have make your gears and chain or have a part number for chain?

resurrected 06-06-2025 07:08 AM
I have bought parts from Rik, he's been great to deal with.


All times are GMT -5. The time now is 03:50 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.