DBleil89

My humble ring is worn and needs replaced. I would see if anyone has a good gimble ring or a transom assembly for sale

AllDodge

iTrader: (1)

Have a transom assembly removed from my 1994 cruiser during rebuild which happened in 2015. Its a fresh water assembly, and some years back before rebuild I had the ring rebuilt and installed a new pin. When replacing the pin I used the Merc method and drilled and tapped holes on the side. Taking a WAG think I replaced the ring in 2010. Pic below is before it was removed and right after. Can take other pics, and have removed the cylinders and lower manifolds. Will take $300 plus ship and I'm in KY

AllDodge

iTrader: (1)

Here are more pics, and this is just for the parts seen. Just did check gimbal bearing and its real smooth no ruffness

AllDodge

iTrader: (1)

Well it only did two of the pics, here is two more

DBleil89

Maybe try email at [email protected]. also if you have time give me a call so we can iron out the details