|
WTB Arneson ASD 8-6 or 8-10
Looking for a set of ASD 8-6 or 8-10 drives. Must be either 19 or 26 spine shaft.
|
Arnesson Asd-8 drives
I have three Arneson ASD-8 drives zF Transmissions and Triple 440 Yanmars complete packages available… Or I will separate Randy Sweers 954-214-6038 |
I may sell my asd 7m kits. 2 yrs old, freshwater. Contact me. Cary [email protected]
|
Arneson drives
I have 2- Arneson ASD 8-10. Drives for sale 51" long . Straight models , 1/1 ratio. Comes with Rolla props , drive shafts , oil tanks , steering helm , Mercury Shifters , transom wedges , air intakes , all 4 rams and tiebar. Everything for $16,500. 727-243-2219 |
Fasthawk- Thanks for the post but after talking to the designer of my hull, he said do not run Arnesons. That and I also bought a newer Scarab this past week, so the 38 project will be ending soon.
Just an FYI though, Straight ASD-8's are not ASD8-10's. The -6, -10, -16 is the drop box measurement. Yours don't have a drop box. |
Originally Posted by endeavour32
(Post 4628112)
Fasthawk- Thanks for the post but after talking to the designer of my hull, he said do not run Arnesons. That and I also bought a newer Scarab this past week, so the 38 project will be ending soon.
Just an FYI though, Straight ASD-8's are not ASD8-10's. The -6, -10, -16 is the drop box measurement. Yours don't have a drop box. |
Mine has a notch in the transom, that is why. If it was a standard transom, then it would most likely work.
|
Originally Posted by endeavour32
(Post 4652456)
Mine has a notch in the transom, that is why. If it was a standard transom, then it would most likely work.
Even with a stagger, only the area where our standoff boxes mount would need an inch or two filled in rather than the entire notch. |
| All times are GMT -5. The time now is 08:05 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.