Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   Wanted (https://www.offshoreonly.com/forums/wanted-244/)
-   -   Looking for a 502 Long Block-TX (https://www.offshoreonly.com/forums/wanted/356017-looking-502-long-block-tx.html)

Treybizttu 08-13-2018 11:32 AM
Looking for a 502 Long Block-TX
 
Like the title says I'm trying to find a good 502 Long Block in Texas or Close by Preferably.

It's replacing a 99 PCM 502 (standard rotation)

Treybizttu 08-13-2018 12:11 PM
Oops. I should have noticed there was a wanted section. My bad.

Splitdecision271 08-13-2018 12:33 PM
Check out TCM Engine Supply in Austin. They sell both brand new and remanufactured long blocks. Everything comes with 3 year warranty too. I'm looking at ordering 2 SBC long blocks from them this winter.

90viper 08-13-2018 03:52 PM
I have a spare 525 longblock with Mercury aluminum heads and a 502 Mercury MPI longblock with steel heads.

Treybizttu 08-13-2018 05:00 PM
Originally Posted by Splitdecision271 (Post 4643392)
Check out TCM Engine Supply in Austin. They sell both brand new and remanufactured long blocks. Everything comes with 3 year warranty too. I'm looking at ordering 2 SBC long blocks from them this winter.
Thanks I found their number and will give em a gingle tomorrow.

Treybizttu 08-13-2018 05:00 PM
Originally Posted by 90viper (Post 4643428)
I have a spare 525 longblock with Mercury aluminum heads and a 502 Mercury MPI longblock with steel heads.
Sent you a PM.

Splitdecision271 08-14-2018 03:12 PM
Let me know how you make out. Talked to the owner several months back to get an idea on pricing. Very reasonable I thought, only a couple hundred dollar difference between new vs reman and I prefer new anyway. A little more than some others out there but only place I saw offering longer than 1 year warranty on parts and labor. Making that kind of investment like to know I have some coverage if needed.

F-2 Speedy 08-14-2018 03:17 PM
90viper I sent you a pm also if the OP is not interested,

Treybizttu 08-15-2018 02:49 PM
Still waiting to here back on PMs...

And thanks to whomever moved this to the wanted section.

90viper 08-16-2018 06:34 AM
Sorry guys traveling. The spare 525 longblock I had for my Donzi paid $5400. Like to get my money out of it. I do not remember on the 502 mpi. I will be back at the office today. Both rebuilt and sitting in climate controlled garage for 4 years.

Treybizttu 08-16-2018 10:45 AM
10-4,

I'd say I'm probably most interested in the 502 so keep me posted.

Trey

Treybizttu 08-28-2018 09:30 PM
Still looking.

Sick Stinger 08-29-2018 06:05 AM
I’ll have a 502 this weekend

Treybizttu 08-29-2018 07:45 AM
Originally Posted by Sick Stinger (Post 4646281)
I’ll have a 502 this weekend
cool, keep me posted. I’ll be at the lake so cell service is hit and miss but I’m a buyer for a good one.

F-2 Speedy 08-29-2018 08:12 AM
whats wrong with the one that 90 viper has ??

Sick Stinger 08-29-2018 08:58 AM
Want it for refresh or drop in?

Treybizttu 08-29-2018 09:17 AM
Originally Posted by F-2 Speedy (Post 4646301)
whats wrong with the one that 90 viper has ??
Nothing that I'm aware of... He was supposed to PM me what the deal was on the motor and I never got it...

Treybizttu 08-29-2018 09:17 AM
Originally Posted by Sick Stinger (Post 4646311)
Want it for refresh or drop in?
Either for the right deal....

Sick Stinger 08-29-2018 09:22 AM
This one is for refresh. Pulled running but ton of hours, want to say 450. Bought it in a boat and was told refresh it. 3200

Treybizttu 08-29-2018 09:46 AM
Originally Posted by Sick Stinger (Post 4646318)
This one is for refresh. Pulled running but ton of hours, want to say 450. Bought it in a boat and was told refresh it. 3200
3200 Shipped to TX?
Any Idea what year or gen?
How Complete?

PM or Call/Email if you like and thanks!

Sick Stinger 08-29-2018 10:08 AM
I’ll have it in House this weekend. I’ll split shipping in it.
compete long block, headed block crank rods Pistons cam basepan lifters push rods ect.

90viper 09-03-2018 12:57 PM
PM sent. Sorry for the delay. Work keeps messing up my play time.

90viper 09-03-2018 01:04 PM
F-2 Speedy. I will be headed to Table Rock in a few weeks. Can bring with me if interested. Due to my delay I need to give op time to respond. Includes pan and black valve covers. Does not have balancer or flywheel since a spare motor but sure I can come up with one.

F-2 Speedy 09-03-2018 02:28 PM
Originally Posted by 90viper (Post 4647026)
F-2 Speedy. I will be headed to Table Rock in a few weeks. Can bring with me if interested. Due to my delay I need to give op time to respond. Includes pan and black valve covers. Does not have balancer or flywheel since a spare motor but sure I can come up with one.
I had a buddy interested in the 525, what condition is it

90viper 09-03-2018 02:41 PM
Rebuilt standard with new rings bearings by shop that does all my work over the last 18 years. Valves are not adjusted. Valve job, springs and valves checked with new lifters. Some say valves should be changed but I have never had a valve failure. Have had one Lifter failure and one bearing failure in the last 18 years. Never found out issue on bearing failure. Twin engine boat only that one idk!!

90viper 09-03-2018 02:51 PM
Like the 502 MPI it has been in climate control storage for around 4 years

F-2 Speedy 09-03-2018 03:15 PM
Originally Posted by 90viper (Post 4647044)
Rebuilt standard with new rings bearings by shop that does all my work over the last 18 years. Valves are not adjusted. Valve job, springs and valves checked with new lifters. Some say valves should be changed but I have never had a valve failure. Have had one Lifter failure and one bearing failure in the last 18 years. Never found out issue on bearing failure. Twin engine boat only that one idk!!
I'll pm you my info if you have some pics ?? have the heads been plugged for running without the heat exchanger

Sick Stinger 09-03-2018 03:34 PM
Just got the motor in, it’s a gen 6 motor.

90viper 09-03-2018 05:51 PM
No it was a backup for my Donzi

F-2 Speedy 09-03-2018 06:58 PM
Originally Posted by 90viper (Post 4647064)
No it was a backup for my Donzi
is it a complete long block including valve covers, whats the asking price you can send me a pm and Ill let my guy know

90viper 09-04-2018 06:02 AM
Includes pan and black valve covers. The one Mercury uses when you buy a replacement long block. Does not have balancer or flywheel since a spare motor but sure I can come up with one. No intake but have one new and one used I would consider selling.

90viper 09-04-2018 06:37 AM
Good morning F-2. The spare 525 longblock I had for my Donzi paid $5400. Like to get my money out of it.

Treybizttu 09-04-2018 11:45 AM
All,

I stumbled into a motor some what local this weekend so I'm good to go. Thanks for the responses and PMs. Some good deals floating around in here.


Trey


All times are GMT -5. The time now is 12:59 AM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.