Offshoreonly.com - Mechanical fuel pumps needed

Offshoreonly.com (https://www.offshoreonly.com/forums/)

- Wanted (https://www.offshoreonly.com/forums/wanted-244/)

- - Mechanical fuel pumps needed (https://www.offshoreonly.com/forums/wanted/357259-mechanical-fuel-pumps-needed.html)

Smoke eater

10-19-2018 06:29 PM

Mechanical fuel pumps needed

Need 2 454 bbc mechanical fuel pumps. Running Holley 750 carbs. Intake and cam motor. I don’t think stock ones are doing it anymore. What does everyone have out there?

freekazoid

10-19-2018 07:57 PM

my buddy was running a 540 with a 1050 dominator with the stock pump and the after market base plate. i thing it was the hardin Marine one.

Baja Rooster

10-19-2018 08:00 PM

You get this pump, take the bottom off, and bolt it to the top of the stocker if you’re running it off a sea pump. If it’s a block mounted pump then you’re good to go. You will need a regulator.

https://www.summitracing.com/parts/hly-12-454-13

freekazoid

10-19-2018 08:27 PM

https://www.hardin-marine.com/p-12460-high-performance-fuel-pump-upgrade-bbc-gen-5-6-engines.aspx

Baja Rooster

10-19-2018 08:32 PM

Quote:

Originally Posted by freekazoid (Post 4655105)

https://www.hardin-marine.com/p-12460-high-performance-fuel-pump-upgrade-bbc-gen-5-6-engines.aspx

If that’s the KE unit, some people have good luck running it but many of us find it to be junk and going back to stock or Holleys.

convincor

10-20-2018 07:44 AM

https://www.superchargedmotorsports....xoCQwkQAvD_BwE

AllDodge

10-20-2018 07:48 AM

Airtex makes the Merc pump 60932

ROB FREEMAN

10-20-2018 11:09 AM

Quote:

Originally Posted by Baja Rooster (Post 4655107)

If that’s the KE unit, some people have good luck running it but many of us find it to be junk and going back to stock or Holleys.

ive run two ke on my 750s for 70 hrs have been flawless fuel delivery to my 1050s. Where my electric holly struggled to pull prime on my blower motors that were pulled that first winter I owned the boat. Good luck

insatiable5

12-23-2018 05:48 PM

Did you find your fuel pumps? If not I have a few new and good ones I don't need anymore.

Dennis 248-640-4114

Smoke eater

12-23-2018 06:09 PM

I ended getting some. Thank you tho

insatiable5

01-05-2019 12:45 PM

I have 4 pumps 150 GPM 1/2" inlet Baker eng. pumps. I dont use anymore. All good 2 may be new. Priced right.

Dennis 248-640-4114

All times are GMT -5. The time now is 10:42 AM.