|
Wanted :30" 4 blade SSM Props
I am looking for a pair of 16.5" to 17" x 30" 4 blade props for my SSM3, 19 or 26 spline (I have adapters)
Can't afford new, not even sure if 30" is my final pitch Also looking for a 19 or 26 spline scrap prop I can modify for a dyno hub Thanks Jason |
I have a pair of 16x34 4 blades 1500
|
Thank you, I don't I have enough HP to spin 34, price is right on!
|
What boat and motors do you have? Trying to figure my boat out is why I am asking.
|
It's a 30' Century Ultra III, single step, the hull is not bad but far from perfect. Has a wee bit of hook and remnants of bottom paint
454's with 177 blowers, SSMIII drives, 1.68 ratio, 16.5 x 29 four blades I bought it last year was able to squeeze 77mph out of it with one very unhappy engine and the other not far behind https://cimg1.ibsrv.net/gimg/www.off...fd97139a70.jpg |
I have a pair of 16.5x28 and 17X29 four blade mercury props. $2000 Thanks Doug |
Doug thank you, but I currently have 29"s
Jason |
Originally Posted by CAFE
(Post 4681301)
I have a pair of 16x34 4 blades 1500
|
Are any of these props 19 Splaine looking for one |
Are all of the props listed 26 spline or 19 spline I’m looking for 19 |
What size are you looking for?
|
Running a 23 four blade right now but, way too small looking for something around 27 to 30 pitch to try or buy, 1100hp single 1.32 gears. Looking for single left hand but would buy a pair |
I found a set of 31"s
I would probably part with my 16.5" x 29"s after I get some testing done with my 31"s. Unfortunately it won't be until next summer |
Sounds good keep in touch, I will let you know if I find anything else |
Will do
Thanks |
| All times are GMT -5. The time now is 11:17 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.