|
4" 316 Stainless
Looking for a piece of 4" diameter 316L stainless exhaust tubing about a foot long.
|
Check out metalsupermarket.com. They only charge you for what you need.
|
Originally Posted by sonic700
(Post 4734143)
Check out metalsupermarket.com. They only charge you for what you need.
https://www.metalsupermarket.com/ |
of all things, try ebay. I got the inner and outer tubing off ebay last summer when I extended my stainless marine risers thru transom , I was even able to get the outer tubing polished and it was a LOT cheaper than I expected.
|
try mcmaster-carr
|
I buy it off Ebay also. $40 per 4ft. I believe it is 0.060" vs 0.080" good for tails a little tricky to weld.
|
I have a 4 ft section
|
Originally Posted by snowrunner
(Post 4734351)
I have a 4 ft section
|
Just checked on the material, mine is only 304 SS. Thought I had 316. Have a 4 ft polished piece new, used this stuff for my 496 exhaust on my 502's.
|
Originally Posted by Smitty275
(Post 4734139)
Looking for a piece of 4" diameter 316L stainless exhaust tubing about a foot long.
|
Found some last night. If you need it it’s yours .
|
Originally Posted by Sick Stinger
(Post 4736653)
Found some last night. If you need it it’s yours .
|
Originally Posted by phragle
(Post 4734162)
of all things, try ebay. I got the inner and outer tubing off ebay last summer when I extended my stainless marine risers thru transom , I was even able to get the outer tubing polished and it was a LOT cheaper than I expected.
|
|
I have 2 about 18 inches long
|
Originally Posted by oceanoutlaw
(Post 4736599)
Believe I have a small piece. I'll take a look tomorrow if you still need it
|
| All times are GMT -5. The time now is 02:26 PM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.