250 Blower Setups
 

Looking for two blower setups for Mark IV 454 (Merc 420), preferably 250's

250 blowers
 

Are you still looking for a set of 250 blowers ?

Yes sir, planning on installing on top my stock, low hour, Merc HP 420's in my 357 SR1

250 blowers
 

[QUOTE=distantthunder;4768696]Yes sir, planning on installing on top my stock, low hour, Merc HP 420's in my 357 SR1[/QUOT

I HAVE A COMPLETE SET IN EXCELLENT CONDITION, INCLUDES MANIFOLDS, PULLEYS, BELTS WITH 1050 DOMINATOR CARBS

[QUOTE=10mfountain;4768714]Shoot me a text 4104908172 with pics, price, and info. Thanks!

This is getting me excited

ive got a pair of merc 575 sci setups, includes new blowershop manifolds, blowers just rwbuilt and teflon stripped from dmpe, all the efi including the harness ecu fuel filter head,cool fuel setup ect

I wonder if it’s a straight bolt on to the Mercruiser 420 Engines.

They are a std deck big block

I have a pair of bm 174’s . They were on very similar motors to your 420’s . Pm me if interested. Tom
https://cimg5.ibsrv.net/gimg/www.off...2a5aeccd4.jpeg

Josh, the 174's would basically help you duplicate the 525sc. The cam used is the same as what you have now, and the extra compression ratio of your 420s will crutch the blower some. You know I like 250s but these could work well.

TZ

FWIW - I have 177's with inter-coolers on fresh 454 roller cam engines making just shy of 620hp, the torque is flat, basically off idle and up. I don't think you could squeeze much more out of that combination of parts. Max RPM with my cam is 5400
Just an example of what can be done with little blowers, I would prefer larger ones and not spin so fast but that's what it came with.

8.5:1 decent alum heads, 731 cam, 177 blower..650+, there you go...

https://cimg7.ibsrv.net/gimg/www.off...efb26bd60.jpeg


ive got 2 sets of these. Ecus, harness, cool fuel, filter head, flame arrestors, throttle body’s , zero hour Teflon stripped 250 blowers and brand new blower shop lower intakes

How easily would these install on my older Mercruiser 420s? I am not too familiar with the 575sci setups but it looks pretty intense. Shoot me a text or give me a ring to discuss. Number listed above. Thanks!

sent you a text

super chargers
 

also have a pr , e-mail me if still looking . [email protected]https://cimg8.ibsrv.net/gimg/www.off...d577edea5a.jpg
https://cimg2.ibsrv.net/gimg/www.off...4af312b60c.jpg
https://cimg5.ibsrv.net/gimg/www.off...4bf3ba34e7.jpg

Make a bigger hole in the hatch Josh!

I had Merc Mag 454's with the 177 superchargers on them. Comp CAM hydraulic cams(Not roller) 850 Holleys. They both made 575 HP on dyno Not bad for turn key totally reliable big blocks. They were in a Cigarette Bullet. Boat ran 80 MPH in flat fresh water. Miss that boat!