Wanted : 2 Oil coolers
 

https://cimg4.ibsrv.net/gimg/www.off...365c834ce.jpeg
https://cimg5.ibsrv.net/gimg/www.off...52c81063c.jpeg
https://cimg6.ibsrv.net/gimg/www.off...f9e19dad4.jpeg
anybody out there have two of these laying around known to be good they would want to part with? Before I buy new ones. These pressure tested ok but I really just don’t trust them and want to start fresh so to speak when my engines get done.

thanks!

.
 

I believe part #

85151T?

I would buy new if it were me, just to reassure myself that I'm not going to have isues with leaky used coolers.

I agree with above, I would not buy a used engine oil cooler unless you personally know the history from new. Beyond leaks they can hide bits of metal from a previous incident and a sonic clean is about the only way to make sure that there is nothing hiding in the cooler.

I agee with others also UNLESS you know or trust long time member but even then I’d flush them out extremely well. (Repeatedly)

Right.
 

Yall are right! I will do what’s right and purchase two new ones that why I know for certain and don’t ever have to guess it. I guess I was hoping by sheer luck somebody would have two new ones they never used lol!

They do pop up so maybe give it a little bit. Keep checking the swap as several people probably don’t always ck the wanted myself included. Not as frequent anyway!

I have a new set of hardin marine coolers, I'll post part numbers later today when I get to the shop.

I've got 2 cools but neither are like the ones in your pic
Changed mine 3 times because I needed a larger cooler to reduce the heat after repower. One is small n=maybe 6 inch long, the other is about 2 inch diameter by 16 or so, would have to measure

Here you go op if your looking to not pay for new I’ve bought from both the above over time I’m certain with no issues whatsoever. Good people!

sent you a message i have two available

I have plenty. Brian 305-893-5018