|
WTB OEM 5.0/5.7 Roller cam
Looking for OEM 5.7 roller. Nothing bigger then 212/218. I mean it's going in a Bayliner ( Not proud to admit that) but just utilizing the factory roller block. It came to me in pieces and just trying to take the kids out this summer.
|
I may have
We are upgrading our cam at the moment, nothing wrong with old one. What is your time frame, cause I'm just getting started on it
|
Hey my primary boat is an old 1989 Bayliner 27.5ft, I did pull the skanky ford 302 and cobra drive and dropped in my tall deck aluminum headed 496 and Volvo dp drive. It’s great for camping, fishing, nothing wrong with them.( I am on a four year resto of a 1977 30ft scarab) if it floats and works it’s a good boat.
|
Comp cams is what i found in the late 98/99 Vortec 350's
Part number is comp cam Xtreme Marine Hydraulic roller 08-416-8. Not a cheap cam but very common.
|
I've got a Summit 8801 Roller with a set of Trickflow non link bar lifters.
|
I think I've even got the spider and the dog bones as well
|
Actual part # is SUM-8801.
Pro SBC Stage 2 Hyd. Roller Cam, 212/218 Dur., 112 LSA + 0 Adv, .525/.520 1.5 Ratio, .560/.555 1.6 Ratio,1500-6000 RPM Range, 87-02 Gen 1 Roller Block From what I understand they are made in Mexico and advertised with a Billet core |
Y'all DO know that the original post here is a little over a year old...
|
I DIDnt see it.
Mostly It was to get my post count up so I could PM Thanks to
Originally Posted by rer233
(Post 4921469)
Y'all DO know that the original post here is a little over a year old...
|
| All times are GMT -5. The time now is 08:25 AM. |
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.