Offshoreonly.com

Offshoreonly.com (https://www.offshoreonly.com/forums/)
-   WKYPA (https://www.offshoreonly.com/forums/wkypa-236/)
-   -   Boating Saturday (https://www.offshoreonly.com/forums/wkypa/206566-boating-saturday.html)

tfarmer 04-10-2009 09:45 AM

1 Attachment(s)
I found time to wash it last week.

customryder 04-10-2009 10:35 AM


Originally Posted by tfarmer (Post 2840703)
Its a old boat. 1991. It really needs a allover paint but ok for now. Ive been looking for one of these boats for a while and lucked up on this one.
Is the water good in your bay?

water is fine..I will get their about 11.00 ish anytime after that is good..

customryder 04-10-2009 10:39 AM

1 Attachment(s)

Originally Posted by flenner (Post 2840683)
Were are the pictures of the new ride Custom?

??? still working on a deal..

but if all goes well....it will have a pair of these..

Jim Diesel 04-10-2009 01:59 PM


Originally Posted by jonyb (Post 2840162)
Anyone gonna be out? I think some of us are gonna try to get out Saturday for a little while. Weather pending, of course.

Wish I could but I cant, drink one for me have fun... :drink:

mama tryed 04-11-2009 03:16 AM


Originally Posted by Jim Diesel (Post 2840901)
Wish I could but I cant, drink one for me have fun... :drink:

My thoughts exactly!!!! Everyone be carefull and watch for "floaters".

mama tryed 04-11-2009 03:22 AM


Originally Posted by customryder (Post 2840756)
??? still working on a deal..

but if all goes well....it will have a pair of these..


daaauuuummmm!!!!!!! Your my idol!!!!!! O.L.?

tfarmer 04-12-2009 10:45 AM


Originally Posted by customryder (Post 2840750)
water is fine..I will get their about 11.00 ish anytime after that is good..

Jeff, I didnt make it that far yesterday. I cruised it about 40mph to the opening of smith bay and everything looked good so I went 1/2 to 3/4 throttle for about a 1/8 mile then shut it
down and opened the hatch to check on it again and found
oil comming out of the fuel pump vent hose and a little from
both oil sticks. I also found out too much oil in each engine.
About 2-qts too much.
I went ahead and spent the rest of the day there cleaning and
enjoing the sun. oh and 1 or 10 beers. On the way back I
opened the secondarys for the first time. I heard the seat brackets start poping so I pulled it back to 1/2
throttle from there back to bee springs and put it on the trailer. I flipped the gps and max speed set was 86.4. I think its going to be 91,92mph like it is and 102,105 with the 1071s
I still have work to do. Maby next weekend I can strech it out.
If I can find the cord for my camera Ill post some vids of yesterday.

Jim Diesel 04-12-2009 07:17 PM


Originally Posted by tfarmer (Post 2842114)
On the way back I
opened the secondarys for the first time. I heard the seat brackets start poping so I pulled it back to 1/2
throttle from there back to bee springs and put it on the trailer. I flipped the gps and max speed set was 86.4. I think its going to be 91,92mph like it is and 102,105 with the 1071s
I still have work to do.

Man you must have been busy building some big powerplants for that thing... Congrats :drink:

tfarmer 04-12-2009 07:47 PM


Originally Posted by Jim Diesel (Post 2842426)
Man you must have been busy building some big powerplants for that thing... Congrats :drink:

11 weeks to the day. Its been every day non stop. I just about got tired of messing with it. But it all paid off saturady.
Are you going out next weekend? I did see three or four other power boats running.

Jim Diesel 04-12-2009 09:42 PM


Originally Posted by tfarmer (Post 2842444)
Are you going out next weekend?

Not yet, I should have my drives back this week and I still have a few small projects to finish.


All times are GMT -5. The time now is 01:01 PM.


Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.