paging houston prop
05-08-2005, 04:53 PM
#1
Registered
Thread Starter
Join Date: Jul 2002
Location: pa
Posts: 2,233
Likes: 0
Received 0 Likes
on
0 Posts
paging houston prop
my 32 active thunder w/ 500s spins my bravo 1 30 pitch props
5500 /5600 rpm at 85/86mph on gps. today i put on my 32 b1s and can only spin them 5000 rpms and 83 mph on gps.
can my 32s be worked to pick up 300/400 rpms and would i gain speed over my 30s.
thanks 32 thunder rick
if so appx how much and how long.
5500 /5600 rpm at 85/86mph on gps. today i put on my 32 b1s and can only spin them 5000 rpms and 83 mph on gps.
can my 32s be worked to pick up 300/400 rpms and would i gain speed over my 30s.
thanks 32 thunder rick
if so appx how much and how long.
05-09-2005, 07:47 AM
#3
Registered
Platinum Member
Join Date: Oct 2002
Location: Merritt Island, Fl.
Posts: 292
Likes: 0
Received 0 Likes
on
0 Posts
Re: paging houston prop
rsstiny,
Call Julie @ Throttle Up. She will help you out with the right info. They do great work and they get it done when they say they will. They will work with you until you are happy.
Dail
Call Julie @ Throttle Up. She will help you out with the right info. They do great work and they get it done when they say they will. They will work with you until you are happy.
Dail
05-09-2005, 05:33 PM
#9
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: paging houston prop
If your still looking for information on your set up, we can help. I must apologize for not paying as much attention to this forum as the prop forum.
Typically the decreas in rpm from the 30 B1's to the 32 is 400rpm. You lost a little more which isn't completely unheard of. I'm not sure about your rpm with the 30's since the rev limiter on HP 500's is 5400. Do you have a different program in your ecu?
Our Labbing thickness curve will deliver an additional 300 rpm in its standard version. We offer additinal curves that will give even more rpm. We would want to discuss your ultimate desires before suggesting that option. Even at 5300, with your currrent slip%, you should see a speed increase.
Call us if we can help. Thanks.
Typically the decreas in rpm from the 30 B1's to the 32 is 400rpm. You lost a little more which isn't completely unheard of. I'm not sure about your rpm with the 30's since the rev limiter on HP 500's is 5400. Do you have a different program in your ecu?
Our Labbing thickness curve will deliver an additional 300 rpm in its standard version. We offer additinal curves that will give even more rpm. We would want to discuss your ultimate desires before suggesting that option. Even at 5300, with your currrent slip%, you should see a speed increase.
Call us if we can help. Thanks.
__________________
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
Brett Anderson / BBLADES Professional Propellers
920-295-4435 http://www.bblades.com/
[email protected]
