Feul pressure sender fitting
#1
Registered
Thread Starter
Join Date: Sep 2003
Location: Toledo, Ohio/Las Vegas, NV
Posts: 3,029
Likes: 0
Received 1 Like
on
1 Post
Feul pressure sender fitting
Want to add a fuel pressure sender to the aft end of the fuel rail. Would like to keep my mechanical guage on the front end. Any ideas where to get a fitting to go from this to 1/4" pipe thread?
#4
SORE MEMBER
Platinum Member
Join Date: Apr 2004
Location: 29°50'49.74"N 95° 5'17.55"W.......TEXAS
Posts: 6,989
Likes: 0
Received 1 Like
on
1 Post
Re: Feul pressure sender fitting
any speed shop should be able to set you up with earles type fittings probably #8 to 1/2 pipe then bushing from 1/2" to 1/8"
#5
Toxic FORMULA
Platinum Member
Re: Feul pressure sender fitting
Originally Posted by RedDog382
Sorry, this is a 1/8" fitting.
But like I said , any HD.