middle floor board rotted
#1
Registered
Thread Starter
Join Date: May 2006
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
middle floor board rotted
My 92 baja 240 middle floor board is rotted out. I just picked up the boat this past summer. Is this an indication the boat may have taken on some H2O ?? The old floor was coated with fiberglass, can I just replace with marine ply ?
Thanks
Thanks
#4
Registered
Join Date: Sep 2004
Location: Tarpon Springs, FL Winter/LBI, NJ Summers
Posts: 497
Likes: 0
Received 0 Likes
on
0 Posts
Re: middle floor board rotted
I have had many boats over the years have rotten wood.... I use http://www.rotdoctor.com/ CPES will help out alot, along with thier resin
I use CPES on all wood, turns it into almost rock even if its rotten...
dont know whats in his mix but use a mask!
I use CPES on all wood, turns it into almost rock even if its rotten...
dont know whats in his mix but use a mask!
#5
Registered
Join Date: Dec 2000
Location: EASTON MA.
Posts: 6,281
Likes: 0
Received 0 Likes
on
0 Posts
Re: middle floor board rotted
Been there went shaped out new piece of m/p I hit it with2layers of glass and add stringers to it real small 2x4 its sweet now been 4yrs mines a 88 doing new full height bulkheads this winter and back seat. art
#6
Registered
Join Date: Jun 2001
Location: Chicago, IL
Posts: 265
Likes: 0
Received 0 Likes
on
0 Posts
Re: middle floor board rotted
Yep, happended to my 1991 boat as well a few years ago. Moisture just built up over time and use and the wood rotted. It was not marine plywood....... I cut it our and replaced it with marine plywood coated on both sides with glass and resin. Should be good for about 83 years or so! Solid as a rock.