Go Back  Offshoreonly.com > Owners Forum > Eliminator
27 Daytona owners >

27 Daytona owners

Notices

27 Daytona owners

Thread Tools
 
Old 04-02-2007, 08:35 AM
  #1  
GT
Registered
Thread Starter
 
GT's Avatar
 
Join Date: Nov 2002
Location: Newbury Park, CA
Posts: 77
Likes: 0
Received 0 Likes on 0 Posts
Default 27 Daytona owners

Hey guys,

I thought I would check with a few of you and see what kind of speed and drive set-ups you have. The reason is: I have an Out of State customer with an 05 27 Daytona/Whipple 525. The boat was set up originally with a 2" short sportmaster and the engine was installed 1" high from the factory .

As soon is this boat starts to run over 85 mph, the prop starts to gradually blow out. It also blows out bad going on plane. At top speed with a 30 lab, the slip is over 13%!

I would love to hear about some factual set-ups from you guys, so my customer does not waste his money on drives, spacers, props, etc............................I think all of you will agree,,,,,,,,,,,,,,,first thing: The drive needs to come down!
GT is offline  
Old 04-02-2007, 09:13 AM
  #2  
Registered
 
gsmith9898's Avatar
 
Join Date: Mar 2005
Location: tulsa, oklahoma
Posts: 1,892
Likes: 0
Received 1 Like on 1 Post
Default

Sell me the whipple and all things should correct themselves.
gsmith9898 is offline  
Old 04-02-2007, 09:33 AM
  #3  
Registered
 
PWRCAT's Avatar
 
Join Date: May 2004
Location: Lees summit
Posts: 108
Likes: 0
Received 0 Likes on 0 Posts
Default

why the 1" higher motor mounts? Id think its up enough with the shortie.
PWRCAT is offline  
Old 04-02-2007, 11:59 PM
  #4  
Registered
 
Join Date: Jun 2005
Location: IL
Posts: 260
Likes: 0
Received 0 Likes on 0 Posts
Default

1 inch shorty Imco Extreme, 1.25 gear 30 pich prop turning 6400rpm, 10% slip with the prop we are running currently. You can figure speed, would rather not say for insurance purposes. The faster you run the more the slip seems to increase. 7 %seems to be a good number for these hulls thats were they should be when everything is right although I have seen better.
I could not run a 2'' shorty on my boat because it was to high. We are currenty going to try adding a 1'' spacer to see if it helps our slip%.

gsmith9898 I have quadrotor for sale if you interested Cheap!
B BOATER is offline  
Old 04-03-2007, 08:13 AM
  #5  
GT
Registered
Thread Starter
 
GT's Avatar
 
Join Date: Nov 2002
Location: Newbury Park, CA
Posts: 77
Likes: 0
Received 0 Likes on 0 Posts
Default

Thanks,

Yah, It's pretty bizarre that the boat was built with the X dimension 1" high to begin with, and then the 2" shorty was added. I would really like to see how it runs when the drive is down a little deeper. The lab props seem to be working ok for you guys?
GT is offline  
Old 04-03-2007, 08:56 AM
  #6  
Registered
 
throttleup's Avatar
 
Join Date: Mar 2002
Location: Cajun Country
Posts: 5,143
Likes: 0
Received 1 Like on 1 Post
Default

What is the make of the prop your running? If it is a Bravo I remember to use 29P not 30P. Also with your drive that high you are really set up for a 5B propeller rather than a 4B. You should try a 5B and post your data.

Julie
throttleup is offline  
Old 04-03-2007, 09:02 AM
  #7  
Registered
 
gsmith9898's Avatar
 
Join Date: Mar 2005
Location: tulsa, oklahoma
Posts: 1,892
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by throttleup
What is the make of the prop your running? If it is a Bravo I remember to use 29P not 30P. Also with your drive that high you are really set up for a 5B propeller rather than a 4B. You should try a 5B and post your data.

Julie
why 29 and not 30?
gsmith9898 is offline  
Old 04-03-2007, 11:23 AM
  #8  
GT
Registered
Thread Starter
 
GT's Avatar
 
Join Date: Nov 2002
Location: Newbury Park, CA
Posts: 77
Likes: 0
Received 0 Likes on 0 Posts
Default

That is what I was thinking,,,,,,,,,,,,,a p5 or a p5x. I will let you guys know what he tries. Thanks
GT is offline  
Old 04-03-2007, 04:33 PM
  #9  
Registered
 
Cat man do's Avatar
 
Join Date: Oct 2001
Location: omaha,nebraska
Posts: 454
Likes: 0
Received 0 Likes on 0 Posts
Default

Gary, Hi Is That Bruces Boat? Marty
Cat man do is offline  
Old 04-03-2007, 08:34 PM
  #10  
Registered
 
gsmith9898's Avatar
 
Join Date: Mar 2005
Location: tulsa, oklahoma
Posts: 1,892
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Cat man do
Gary, Hi Is That Bruces Boat? Marty
Marty, did you get the pm I sent you looking for the place you stayed last year at loto? Gary Smith
gsmith9898 is offline  


Quick Reply: 27 Daytona owners


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.