350 MPI kill switch
#1
Pirate of the Chesapeake
Gold Member
Thread Starter
iTrader: (2)
Join Date: Aug 2006
Location: North Point Creek, Md.
Posts: 4,330
Likes: 0
Received 0 Likes
on
0 Posts
350 MPI kill switch
Hey guys I just put a 350 MPI engine in my stinger. I have a alpha one drive, that has a momentary kill switch in the shifting linkage for killing the engine when you shift.It did it by grounding the ignition in the carb motor .Now I have the comp.mpi motor .What wire can I use to do this same function. Can I use the kill switch wire back by the dist.Not sure of the wire color. What wire can I use. Don't want to burn anything up.I'm Lost need help. Thanks JOHN
#2
JBBEARD
Gold Member
Join Date: Jan 2004
Location: little rock, AR
Posts: 242
Likes: 0
Received 0 Likes
on
0 Posts
MPI or carb no difference to the kill switch grounding ignition- just wire it back the same as before. If you not sure, have someone help by using a OHM meter while shifting to see which wire does the grounding and use it to ground the ignition as before- My best advice would be to have a qualified mechanic look at this for you !
#3
Registered
Join Date: Nov 2006
Location: Vrouwenpolder, The Netherlands
Posts: 30
Likes: 0
Received 0 Likes
on
0 Posts
I had the same problem, what year is your engine?
This is what I tried.
http://www.offshoreonly.com/forums/s...d.php?t=165059
Richard
This is what I tried.
http://www.offshoreonly.com/forums/s...d.php?t=165059
Richard