gauges
08-25-2010, 06:56 PM
#4
Platinum Member
Platinum Member
Water pressure is easy to set up mechanical with a small hose from the intake manifold to the dash. I suggest the oil temp gauge at or after the oil cooler....maybe the oil filter housing depending on your rigging. If you want a high oil temp alarm, we have this sender in the oil pan.
08-26-2010, 10:25 AM
#5
Registered
Platinum MemberThread Starter
Join Date: Mar 2007
Location: Toms River, New Jersey
Posts: 285
Likes: 0
Received 0 Likes
on
0 Posts
sender location
Water pressure is easy to set up mechanical with a small hose from the intake manifold to the dash. I suggest the oil temp gauge at or after the oil cooler....maybe the oil filter housing depending on your rigging. If you want a high oil temp alarm, we have this sender in the oil pan.
08-26-2010, 11:42 AM
#6
Charter Member # 55
Charter Member
Water pressure guages are always mechanical. You can just install the tube and fitting into the intake manifold or into a block drain. The ones installed in the block drain tend to clog easily if you have boat where there is sand in the water.
