cam help
03-03-2011, 05:09 PM
#1
Registered
Thread Starter
Join Date: Jun 2007
Posts: 52
Likes: 0
Received 0 Likes
on
0 Posts
cam help
502 750carb vic jr intake hp500 heads stainless marine exhaust std risers
what cams are you guys safely running with sm exhaust with std risers? was planning on running a 500 cam but dont have the cash for the cust risers they sell this year and dont want reversion drama
thanks
dan
what cams are you guys safely running with sm exhaust with std risers? was planning on running a 500 cam but dont have the cash for the cust risers they sell this year and dont want reversion drama
thanks
dan
Last edited by Someguy; 03-03-2011 at 05:16 PM.
03-03-2011, 07:10 PM
#2
Registered
502 750carb vic jr intake hp500 heads stainless marine exhaust std risers
what cams are you guys safely running with sm exhaust with std risers? was planning on running a 500 cam but dont have the cash for the cust risers they sell this year and dont want reversion drama
thanks
dan
what cams are you guys safely running with sm exhaust with std risers? was planning on running a 500 cam but dont have the cash for the cust risers they sell this year and dont want reversion drama
thanks
dan
03-03-2011, 08:51 PM
#3
Registered
iTrader: (1)
You will need at least an 800 CFM carb depending on the RPMS you plan on spinning it.
I have two stock 502 cams with zeros hours, springs retainers. Cheap if you need one.
I spend the coin and had Bob put together two new cams for my new brand new engines.
I have two stock 502 cams with zeros hours, springs retainers. Cheap if you need one.
I spend the coin and had Bob put together two new cams for my new brand new engines.
Last edited by 1BIGJIM; 03-03-2011 at 08:54 PM.
