red w purple stripe or red w/black stripe
05-22-2013, 10:49 PM
#1
Platinum Member
Platinum MemberThread Starter
iTrader: (5)
Join Date: May 2001
Location: NO WHERE
Posts: 3,358
Likes: 0
Received 0 Likes
on
0 Posts
red w purple stripe or red w/black stripe
can anyone tell me what they go to? been having a start prob since I put the engines back in. ive got a yellow w/redstripe to one of the starter slave cyl small wires and a red w/ purple maybe red and black on the other. starter does not do anything. was looking and the small terminals should have a yellow w/red stripe and a ground I think this is the culprit. what do you guys think?
05-22-2013, 11:57 PM
#2
Registered
Join Date: Mar 2009
Posts: 496
Likes: 0
Received 0 Likes
on
0 Posts
05-23-2013, 06:14 PM
#3
Platinum Member
Platinum Member
[ATTACH=CONFIG]501244[/ATTACH]
Here ya go!
Here ya go!
05-23-2013, 08:42 PM
#4
Registered
Join Date: Aug 2009
Location: Oak Creek, Wisconsin
Posts: 90
Likes: 0
Received 0 Likes
on
0 Posts
Award for Best Most Helpful Reply Of The Week to KWright for the above response with a scanned picture very clear!
Wow that is great, knowledge, info source and the motivation to scan and post it up!
Wow that is great, knowledge, info source and the motivation to scan and post it up!
Gold Member
05-25-2013, 03:01 AM
#7
Registered
Join Date: Feb 2007
Location: Sweden
Posts: 161
Likes: 0
Received 0 Likes
on
0 Posts
You should have thin yellow/red and thin black on the small side terminals, medium red/purple and medium yellow/red on the bigger top terminals. (Red/purple is FUSED red, after the circuit breaker)
In case your engine has the transmission wiring harness there should be a yellow/black instead of black from the small terminal to the shift interupt on the transmission, which in turn grounds the circuit through a black.
Sorry, but I don't remember the us wire sizes right now, hope my definitions works ;-)
In case your engine has the transmission wiring harness there should be a yellow/black instead of black from the small terminal to the shift interupt on the transmission, which in turn grounds the circuit through a black.
Sorry, but I don't remember the us wire sizes right now, hope my definitions works ;-)
