Can I use my old flywheel and harmonic balancer from my old motors, they are gen.4 motors with 2 piece rear main seal? The stroker kits are internally balanced I think.
6.385 rods and forged crank?? dont buy the assy ballanced,,the machine shop will have to check it again and they can machine the weight off the flywheels and like mentioned you will need a 396-427 harmonic lancer..
6.385 rods and forged crank?? dont buy the assy ballanced,,the machine shop will have to check it again and they can machine the weight off the flywheels and like mentioned you will need a 396-427 harmonic lancer..
Yes the rods are 6.385 and the crank is a 4340 crank.
Flywheel On 496 Stroker
