Go Back  Offshoreonly.com > Technical > General Q & A
Flywheel On 496 Stroker >

Flywheel On 496 Stroker

Notices

Flywheel On 496 Stroker

Old 07-07-2013, 02:45 PM
  #1  
Registered
Thread Starter
iTrader: (2)
 
Craney's Avatar
 
Join Date: Oct 2004
Location: Clayton NJ
Posts: 2,427
Received 378 Likes on 172 Posts
Default Flywheel On 496 Stroker

Can I use my old flywheel and harmonic balancer from my old motors, they are gen.4 motors with 2 piece rear main seal? The stroker kits are internally balanced I think.
Craney is offline  
Old 07-07-2013, 03:37 PM
  #2  
Registered
iTrader: (3)
 
Join Date: Sep 2009
Posts: 918
Received 5 Likes on 3 Posts
Default

If your gen iv's are 454's you will need new flywheels ...454'a are externally balanced...Same with balancer
motor is offline  
Old 07-07-2013, 04:27 PM
  #3  
Registered
 
Join Date: Nov 2005
Location: Fredericksburg, Va
Posts: 4,554
Likes: 0
Received 2 Likes on 2 Posts
Default

need 396-427 type...and you better get the engines balanced !
ezstriper is offline  
Old 07-10-2013, 06:38 PM
  #4  
Registered
Thread Starter
iTrader: (2)
 
Craney's Avatar
 
Join Date: Oct 2004
Location: Clayton NJ
Posts: 2,427
Received 378 Likes on 172 Posts
Default

The stroker kits are internally balanced.
Craney is offline  
Old 07-10-2013, 08:51 PM
  #5  
Registered
iTrader: (2)
 
Join Date: Aug 2005
Location: Between A Womans Leggs in IL
Posts: 6,306
Likes: 0
Received 1 Like on 1 Post
Default

Originally Posted by Craney
The stroker kits are internally balanced.
6.385 rods and forged crank?? dont buy the assy ballanced,,the machine shop will have to check it again and they can machine the weight off the flywheels and like mentioned you will need a 396-427 harmonic lancer..
FIXX is offline  
Old 07-10-2013, 09:48 PM
  #6  
Registered
Thread Starter
iTrader: (2)
 
Craney's Avatar
 
Join Date: Oct 2004
Location: Clayton NJ
Posts: 2,427
Received 378 Likes on 172 Posts
Default

Originally Posted by FIXX
6.385 rods and forged crank?? dont buy the assy ballanced,,the machine shop will have to check it again and they can machine the weight off the flywheels and like mentioned you will need a 396-427 harmonic lancer..
Yes the rods are 6.385 and the crank is a 4340 crank.
Craney is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.