Hydraulic hatch accuators
#1
Crazy Energy
Platinum Member
Thread Starter
iTrader: (4)
Join Date: Aug 2007
Location: Oklahoma God's country no one else wants it.
Posts: 4,334
Likes: 0
Received 1 Like
on
1 Post
Hydraulic hatch accuators
any ideas? Here's the deal
I have these hydraulic rams I plan to use to open and close my two hatches on the cat project. I also planned to use a trim pump to power these rams. The problem is the trim pump tank does not have enough capacity to fully open these long cylinders. Do they make a larger tank to fit the trim pumps (probably not) should I try to modify a tank to fit the trim pump that has enough capacity?
These are the tanks I have now.
[ATTACH=CONFIG]505691[/ATTACH]
cylinders
[ATTACH=CONFIG]505689[/ATTACH]
I have these hydraulic rams I plan to use to open and close my two hatches on the cat project. I also planned to use a trim pump to power these rams. The problem is the trim pump tank does not have enough capacity to fully open these long cylinders. Do they make a larger tank to fit the trim pumps (probably not) should I try to modify a tank to fit the trim pump that has enough capacity?
These are the tanks I have now.
[ATTACH=CONFIG]505691[/ATTACH]
cylinders
[ATTACH=CONFIG]505689[/ATTACH]
Last edited by Velocity Vector; 08-06-2013 at 09:43 PM.
#2
Registered
I am also wondering if they make a larger tank. I have the same problem! The tank on my bennett pump dose not have enough capacity to fulley extend my rams.