F-2 Speedy

iTrader: (6)

What are you guys using ? is there a complete kit for a 4150 base

thanks

f_inscreenname

https://www.summitracing.com/parts/sum-g1419

Crude Intentions

iTrader: (1)

I'm going with these

http://www.cpperformance.com/p-341-s...rburetors.aspx

getrdunn

iTrader: (7)

They will also bend if needed depending on your set up.

SB

iTrader: (1)

Does it come with the cable holder and carb bushing ? Most don't for some dumb reason and prob why the OP posted this thread.

indysupra

iTrader: (3)

I went with what icu has and then a cable end kit from cp also. With the standard mercury controls the throw is off, on a set of controls with the different points to change the throw it's not a big deal

F-2 Speedy

iTrader: (6)

yes SB, is a complete kit to much to ask for............Indy where you able to get the adjustment correct with that bracket ??

SB

iTrader: (1)

I use this: http://www.cpperformance.com/p-14094...rsion-kit.aspx
that bolts to back of cable brackets. The brass barrel on the cable will slide on to this.

I get the bushing from where ever. https://www.summitracing.com/parts/mor-64920
Need to get a 1/4" bolt to gothru this and the cable end. I get 2 nuts for the bolt. That way, if you have to take cable end off this side, you can just undo one nut.

F-2 Speedy

iTrader: (6)

Thanks, that first link is much better than the single bolt clamp

Crude Intentions

iTrader: (1)

I am adding he same piece from cp that SB posted. I swapped from fuel injection so needed it all