Oil Cooler Plumbing
02-15-2004, 03:33 PM
#1
Registered
Thread Starter
Join Date: Jan 2002
Location: HARRISON HOT SPRINGS B.C.
Posts: 194
Likes: 0
Received 0 Likes
on
0 Posts
Oil Cooler Plumbing
Has anyone ever plumbed there oil cooler lines into the ports in the block on the pan rail.I was considering getting rid of the remote filter and plumbing the cooler here.The ports are only 3/8 npt.Most of the sandwich units are 3/8 npt as well.The original lines are 1/2 inch.
02-16-2004, 08:33 AM
#2
Registered
Join Date: Jan 2001
Location: ST. Louis, MO, USA
Posts: 1,658
Likes: 0
Received 0 Likes
on
0 Posts
I'm guessing you're referring to a Gen V engine. My understanding is that those were never intended to be used for 100% of the oil supply to be run through. Stick with the remote filter/cooler setup.
