Alpha One impeller flow.
#2
Offshoreonly Advertiser
Offshoreonly Advertiser
Re: Alpha One impeller flow.
Depends on the drive ratio, there are actually instructions & specs for a flow test in the shop manual.
__________________
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
Marc
www.mercruiserparts.com
www.go-fast.com
www.bammarine.com
www.cyborgtransmissions.com
It's not alive -www.BoatStuffExpress.com - temporarily retired
#3
Gold Member
Gold Member
Re: Alpha One impeller flow.
[QUOTE=seapotato]Does anyone know how many gallons per hour Alpha One impeller produce? It would depend on a bit more information input. It would depend on r.p.m., drive ratio, would the water source be pressurized or not, etc... Just curious, why do you need to know the answer to this? Ed
#4
Guest
Posts: n/a
Re: Alpha One impeller flow.
Mbam: the ratio is 1.48:1
I have Seloc and Clymer manuals. Nothing in there.
What manual has water flow data? Thx.
***********
Ed: the rpms are: 1000, 2000, 3000, 4000. I want to know how many gph for each of those (or what info is available).
Drive ratio is 1.48:1
The water is not presurized, just outboard water.
I intend to build an alarm when the water flow is under the requested level.
thx.
I have Seloc and Clymer manuals. Nothing in there.
What manual has water flow data? Thx.
***********
Ed: the rpms are: 1000, 2000, 3000, 4000. I want to know how many gph for each of those (or what info is available).
Drive ratio is 1.48:1
The water is not presurized, just outboard water.
I intend to build an alarm when the water flow is under the requested level.
thx.
Thread
Thread Starter
Forum
Replies
Last Post
Thirsty Turtle
General Q & A
7
08-26-2004 10:19 AM