Trim Tab Mounting
#1
Gold Member
Gold Member
Thread Starter
Join Date: Apr 2004
Location: Myrtle Beach, SC
Posts: 173
Likes: 0
Received 0 Likes
on
0 Posts
Trim Tab Mounting
I am trying to find the corrrect mounting distance up from the bottom of the boat to the bottom of the trim tab itself. The tabs that I am inquiring about are Kiekafer k Planes. I do not know the part number but they are about 22 inches long. Any assistance with this info would certainly be appreciated.
#5
Gold Member
Gold Member
Re: Trim Tab Mounting
You might want to ask the manufacutrer of your boat. I'm noticing more boats with the tabs mounted parallel with the ground rather than parallel with the 'V' of the hull. I'm not sure what the reason is.
#6
Registered
iTrader: (2)
Re: Trim Tab Mounting
Originally Posted by Dave M
You might want to ask the manufacutrer of your boat. I'm noticing more boats with the tabs mounted parallel with the ground rather than parallel with the 'V' of the hull. I'm not sure what the reason is.
#7
Registered
Join Date: Dec 2000
Posts: 552
Likes: 0
Received 0 Likes
on
0 Posts
Re: Trim Tab Mounting
I saw a vee with the tabs mounted parallel with the ground and close to the drive. He said his boat was very sensitive to tab movement. His reason was, as the water comes out of the transom it is following the vee. when you activate the tab the entire surface of the tab comes in contact with the water. When the tabs are mounted horizontal the outer edge of the tab contacts the water first making slow response. The more you lower the tab the more surface contact, speeding the response.
#8
Re: Trim Tab Mounting
Originally Posted by Dave M
You might want to ask the manufacutrer of your boat. I'm noticing more boats with the tabs mounted parallel with the ground rather than parallel with the 'V' of the hull. I'm not sure what the reason is.