cabin door wheel
So I decided to clean the crap from behind the port side helm and snowball effect took place and now powder coating door tracks, aluminum, brackets etc. I NEED a new roller for the door slide. It is hard black plastic and very specific. I emailed Phil. I am wondering if anyine has one ? I will machine one if necessary, but doesn't hurt to ask !! Thx Boys ,Greg
|
Originally Posted by greg bakker
(Post 3692731)
So I decided to clean the crap from behind the port side helm and snowball effect took place and now powder coating door tracks, aluminum, brackets etc. I NEED a new roller for the door slide. It is hard black plastic and very specific. I emailed Phil. I am wondering if anyine has one ? I will machine one if necessary, but doesn't hurt to ask !! Thx Boys ,Greg
|
Man, how about you do a little less OSO and more Jimmys marine service !!!!!!!
|
Ttt
|
I had the same problem a couple of years back and i had a machine shop make one out of delrin. cost about 55 bucks for 2 of them.
also i think you can buy two tubes of delrin and slide one inside the other then cut to size. |
Have you tried Mc Master-Carr?
|
Delrin it is. I have a guy spinning them now ! Thx for the response. I could not find them anywhere. Greg
|
All times are GMT -5. The time now is 07:54 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.