Dimensions for #3A vs. #5 SSM

RMPRam · 10-22-2009, 10:32 PM

Does anyone have the dimensions, for the distance from the centerline of the input to centerline of the propshaft for a #3A drive and a #5 drive. I have it written down somewhere, but can't find it.
Thanks for any help.

Gary

rv · 10-23-2009, 08:17 AM

Whats a matter Gary, you loose your tape measure...
Or is it you don't know which set of the 3A or 5's to pick in your garage to measure.

Rick

Biggus · 10-23-2009, 08:56 AM

SSM III, 24.311" Input shaft to propshaft

SSM IV, V, 18.687"

RMPRam · 10-23-2009, 09:10 AM

You know, that you are too lazy, when you have 4ea. #3A's and 7ea. #5 drives, in the shop, and it takes too much of your "valuable" time to go measure these differences.
Thanks for the measurements.

tssteph · 10-23-2009, 10:43 AM

Here is what I have

Bravo 22"

SSMII 25.122"

SSMIII/IIIA 24.311"

SSMIV 18.687"

SSMV 18.687"

SSMVI 18.5"

IRONMAN · 10-27-2009, 11:16 PM

Quote:

Originally Posted by tssteph

Here is what I have

Bravo 22"

SSMII 25.122"

SSMIII/IIIA 24.311"

SSMIV 18.687"

SSMV 18.687"

SSMVI 18.5"

I had the TRS at 24" also if someone can confirm this?

A.O. Razor · 11-02-2009, 03:56 PM

I thought that the bravo was 21-13/16? Oh well