Does anyone have the dimensions, for the distance from the centerline of the input to centerline of the propshaft for a #3A drive and a #5 drive. I have it written down somewhere, but can't find it.
Thanks for any help.

Gary

Whats a matter Gary, you loose your tape measure...
Or is it you don't know which set of the 3A or 5's to pick in your garage to measure.

Rick

SSM III, 24.311" Input shaft to propshaft

SSM IV, V, 18.687"

You know, that you are too lazy, when you have 4ea. #3A's and 7ea. #5 drives, in the shop, and it takes too much of your "valuable" time to go measure these differences.
Thanks for the measurements.

Here is what I have

Bravo 22"

SSMII 25.122"

SSMIII/IIIA 24.311"

SSMIV 18.687"

SSMV 18.687"

SSMVI 18.5"

I had the TRS at 24" also if someone can confirm this?

I thought that the bravo was 21-13/16? Oh well