Wear pads...
#1
Registered
Thread Starter
Join Date: Mar 2008
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Wear pads...
I need to make a couple that are no longer available. Anyone done this before and know specifically what material would be the best to use? I can make some guesses that will surely work fine, but if anyone has some experience I'd appreciate any insight you can provide. Thanks!
#3
Registered
Thread Starter
Join Date: Mar 2008
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
both these - alpha one ss, land and sea sternjack are fairly thick tough pads with countersunk screws to hold them on. I'm going to use filled black high density polyethylene - should work great....