Hey guys,
I thought I would check with a few of you and see what kind of speed and drive set-ups you have. The reason is: I have an Out of State customer with an 05 27 Daytona/Whipple 525. The boat was set up originally with a 2" short sportmaster and the engine was installed 1" high from the factory.
As soon is this boat starts to run over 85 mph, the prop starts to gradually blow out. It also blows out bad going on plane. At top speed with a 30 lab, the slip is over 13%!
I would love to hear about some factual set-ups from you guys, so my customer does not waste his money on drives, spacers, props, etc............................I think all of you will agree,,,,,,,,,,,,,,,first thing: The drive needs to come down!




LinkBack URL
About LinkBacks
. 



Reply With Quote

