buying a grinder...need advice
#11
If you pick up a 3' backing disk you should also get a two inch one as well. As you use up the three inchers cut them down to the twos.
__________________
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
Throttles- Cleveland Construction 377 Talon
08 OPA Class 1 National Champion
08 Class 1 Geico Triple Crown Champion
08 OPA High Points Champion
10 OPA Class 1 National Champion ( happy now Ed! )
#13
Registered
Thread Starter
Join Date: May 2007
Posts: 36
Likes: 0
Received 0 Likes
on
0 Posts
I picked up a two inch backing disc since my compressor is smaller and it will take less air to move 2" comapred to 3". I may pick up a 3" this weekend.
It is not the the hard disc one. It has the rubber backing plate and the "twist lock" abrasive discs in all grits. I did not get a hard disc grinder for the reason you mentioed
It is not the the hard disc one. It has the rubber backing plate and the "twist lock" abrasive discs in all grits. I did not get a hard disc grinder for the reason you mentioed
Thread
Thread Starter
Forum
Replies
Last Post
Strip Poker 388
Trucks, Trailers and Transportation
29
04-13-2008 03:56 PM
THRILLSEEKER
General Boating Discussion
10
01-29-2003 12:02 PM