Tips for Silent Thunder platform removal?
#1
VIP Member
VIP Member
Thread Starter
Join Date: Nov 2008
Location: LOTO/Weldon Spring, MO
Posts: 106
Likes: 0
Received 0 Likes
on
0 Posts
Tips for Silent Thunder platform removal?
I am taking it off and I dont want to damage the hull any pointers as I hear these can be stuck to the gel coat.
Thanks
Thanks
#2
Registered
Join Date: Jan 2005
Location: Batavia, Oh
Posts: 29
Likes: 0
Received 0 Likes
on
0 Posts
Mine was stuck on pretty hard, especially at the top. There was a green epoxy on it that must not have been totally set when it was installed new. Had to keep working it up and down to get it to break loose but it still pulled a couple of small places off the gel coat. Wasn't a big problem for me as I was putting it back on anyway.
#3
Registered
Join Date: Mar 2006
Location: Tulsa, OK
Posts: 28
Likes: 0
Received 0 Likes
on
0 Posts
I took an oil filter wrench and twisted the tips back and forth until they broke loose and then gently pryed on them with a flat blade screwdriver until they came out! Pretty easy...
NOMO... Sorry I havent gotten any pictures to you yet, I am at the firestation today and will be home tomorrow where I will hopefully remember to send those to you!
Tyler
[email protected]
NOMO... Sorry I havent gotten any pictures to you yet, I am at the firestation today and will be home tomorrow where I will hopefully remember to send those to you!
Tyler
[email protected]