aquaforce

Any 419 owners know the height measurement for the cabin? I was reading the posts on 419's and someone asked this question but I didn't see an answer. Just curious if it is higher than the 382. I suppose it could change with production years too so if it did what is the early and late measurements?

RT930turbo

I think it is just slightly more than the 382. It's not really noticable though. (I still can't even come close to standing in a 419)

RT930turbo

If you check the formula brochures in the vintage section, they will have the measurements

jeff32

they are higher for sure
my 357 was... 43 inches if im right a 382 is 45 inches high and i think 419 are around 49 or 50 inches ill try to find my notes...

jeff32

http://www.formulaboats.com/document...20Brochure.pdf

RT930turbo

5'5" 419 vs 5'1" 382. Thanks for the link Jeff. Both boats have much much more headroom than the old sr-1 boats.

aquaforce

Thanks for the link. I see the cabin headroom listed in the 1999 brochure but I had been looking at the 90's brochures and didn't see that spec listed.
Is the cabin headroom the same as 90's? I know the 382's got more room due to the fastech design from the previous builds and wondered if the 419 changed any through the years. The 5'5" in the 99 sounds pretty good compared to my 89 357. My wife could stand up in the 419 at that height.

Do I understand right that the 419 never got the structure grid?

aquaforce

I know some bigger guys want the standing comforts but I can't get away from the offshore look so I'm good with stooping in the cabin. I'm not a big guy but I can't stand up in a cabin less than 6' so I won't get concerned about that until I settle on a 400SS. At least the 400 keeps the offshore look.

Mr Maine

4' 9" in a 311 just measured

aquaforce

I haven't pulled a tape on my 357 but that sounds close to the cabin height in it. I would like a little more for the sake of the toilet.