fourplaydave69

Could someone tell me in which direction the hose goes from the cooler? And does it attach to anything? Thanks

tbrown15239

Mine at first just ended under the cabinet so I bought new clear hose and routed it to the back so it would drain into the bilge area. It took all of 30 minutes to do and no problem since

Wildman_grafix

Mine connected to the sink drain,,,,,,,,, not the best way, it's lower then the sink drain when boat is siting in water.

malo29

iTrader: (1)

mine also connected to the sink drain at one time now it drains directly out the side of the boat witha thru hall fitting. works great

US1 Fountain

iTrader: (1)

Mine was routed onto the top of the gas tank when I 1st got it. That would be the same compartment that has no drains! Figure that one out.
I also ran a drain hose underneath the floor and out one of the drain holes into the bilge if I ever wanted to use the cooler. There is a small gap between the floor underneath side and the bulkheads where the hose can pass thru. Remove the gas tank inspection cover to help feed the hose thru.

tim brown

malo29 , how do you think it got connected to a thru hull fitting ? how come it works so good ? ha ha

malo29

iTrader: (1)

I would say it works so good cause tim brown did it...

US1 Fountain

iTrader: (1)

Never met a man afraid to drill a hole thru the side of someone elses boat.

fourplaydave69

Thanks for the replies.

tim brown

it was mine when I drilled the hole , I need to do the samething to my 35 . don't be scared .