SCX 4's on a 35

[KWright]

Just ordered my imco scx4's from John Teague. thier going to send bottom's out next week to Craig Wilson for blueprinting. This will put my propshaft c/l about 1" above the bottom. Herring 5 blades. Be interesting to see what this does.

[HOT_RODN99]

Just ordered my imco scx4's from John Teague. thier going to send bottom's out next week to Craig Wilson for blueprinting. This will put my propshaft c/l about 1" above the bottom. Herring 5 blades. Be interesting to see what this does.

Nice! What year 35 is this going on? And what kind of power? Looking forward to your results!

[KWright]

It's a 2001 race hull. The motors are N/A 550 hp. With reg XR's and hydro p5x's it would run right at 90 @ 5500 rpm.

[A.O. Razor]

Are you going to run SSM style props on them or Bravo style?

[KWright]

SSM Herring wants to start out with a 17x30. Would like to turn the motors 6200 rpm.

[A.O. Razor]

SSM Herring wants to start out with a 17x30. Would like to turn the motors 6200 rpm.

Ok. Looks like you're shooting for 100+ mph with those Herings? Any motor upgrades?

[Reggie Fountain]

Should run great, sounds like a fun project.

[mcprodesign]

Sounds like a cool deal, keep us updated !

[KWright]

Ok. Looks like you're shooting for 100+ mph with those Herings? Any motor upgrades?

Thats what their telling me, Only time will tell. No upgrades this year biowing the budget on the drives.

[KWright]

Should run great, sounds like a fun project.

Im hoping, I got big steps to follow seeing this was your old boat!