Lift for 47 fountain
#1
Registered
Thread Starter
Join Date: Jun 2013
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Lift for 47 fountain
I have a deposit pending survey on a 47 fountain. Any recommendations for a lift manufactuer? The water is too rough to do any type of floating lift. I need something that would be a piling installation in a saltwater. Thank you in advance for any suggestions.
#2
Registered
What area of the country are you?
#3
Registered
I've had a magnum boatlift for 21 years now, has been extremely reliable. Had to replace electric motors and switches after Sandy but it has been a good lift. Recently moved to another slip and another Magnum lift . They are in Odenton Maryland, very helpful on the phone and anything you may need ships out right away. If you are on the east coast , give them a shot.
#4
Registered
Thread Starter
Join Date: Jun 2013
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
I'm in South Jersey. Thank you for the recommendation on the Magnum Boat Lift. Has anyone had any experience with www.noprofileboatlifts.com
#6
Registered
Join Date: Mar 2017
Location: Grand Island, NY
Posts: 11
Likes: 0
Received 0 Likes
on
0 Posts
I have magnum boat lifts, they're fine. You'd need the saltwater version. Hydraulic boat lifts exist too, they are faster and more expensive. The no profile boat lift for a 47' fountain would be quite amazing, from the pics. But call Myco and get a cradle that will be an exact fit for your fountain. That way you're not banging hard into the bunks on a busy day....which you'll have to measure and add 2x4's to fit the steps, anyways. I know for sure Myco cradles fit the Magnum boat lifts. Unfortunately the shipping for the smaller cradles is as much as the cradle itself. Not a problem in your case.