In truck compressors
#1
speel chekk this fokker!
Charter Member
Thread Starter
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
In truck compressors
i did a website for a frined onf mine'c company and they just told me abotuanew prouct they are carrying. Its n air compressos that uses your engine to power it! Its aneat device and is actory aproved (won't void warranty and might be OEM optional equipment in the near future) you can check it out at www.vmac.ca
if you actually want to buy one please go to www.mcindoo.com or call 516-454-0100 and just mention Brendan told you about them. From what I hear they work better and are cheaper than most other portable compressors
if you actually want to buy one please go to www.mcindoo.com or call 516-454-0100 and just mention Brendan told you about them. From what I hear they work better and are cheaper than most other portable compressors
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
#3
Platinum Member
Platinum Member
That's pretty cool!
Looks like a neat idea in a tight package!
I had a truck back in the day that didn't exactly benefit from it having A/C so I rigged the A/C compressor with a hard-wired clutch to a switch and installed an in-line pressure regulator. It fed the compressed air to a small 4-gallon tank which subsequently had some air hose couplers. It was cool, I could run all my air tools and never had to worry about finding air.
Looks like a neat idea in a tight package!
I had a truck back in the day that didn't exactly benefit from it having A/C so I rigged the A/C compressor with a hard-wired clutch to a switch and installed an in-line pressure regulator. It fed the compressed air to a small 4-gallon tank which subsequently had some air hose couplers. It was cool, I could run all my air tools and never had to worry about finding air.
#4
speel chekk this fokker!
Charter Member
Thread Starter
Join Date: Feb 2001
Location: Locust Valley, New York
Posts: 5,329
Likes: 0
Received 0 Likes
on
0 Posts
i did www.mcindoo.com A friend of mine's dad runs eth company an di traded him teh site for use of his forklift and wearhouse to pull and install my engine. So that site was done quickly and as cheap as possible (while still maintaing a decent appearance).
If you were talking about the vmac site that wasn't done by me, flash really isn't my thing.
If you were talking about the vmac site that wasn't done by me, flash really isn't my thing.
__________________
Pardon me, while I whip this out!
Pardon me, while I whip this out!
Thread
Thread Starter
Forum
Replies
Last Post
THEJOKER
Trucks, Trailers and Transportation
33
12-19-2007 09:09 AM
PWRCAT
Trucks, Trailers and Transportation
16
06-01-2005 05:47 PM